Министерство науки и
высшего образования
Российской Федерации
Российская Академия Наук
Отделение энергетики, машиностроения
механики и процессов управления
Федеральное государственное бюджетное учреждение науки
Институт машиноведения
им. А.А. Благонравова
Российской академии наук
imash.ru » Научные отделы ИМАШ » Прочность, живучесть и безопасность машин » Публикации » Публикации, индексируемые в WoS
Публикации, индексируемые в WoS или (и) Scopus (все включены также в РИНЦ)
2013-2015г.г.
2013-2015г.г.
|
1
|
A COMPUTATIONAL TOOL FOR ESTIMATING STRESS FIELDS ALONG A SURFACE CRACK FRONT
Chernyatin A.S., Matvienko Y.G., Razumovsky I.A. Fatigue & Fracture of Engineering Materials & Structures. 2015. Т. 38. № 2. С. 180-189. |
|
2
|
A CRITERION BASE FOR ASSESSMENT OF STRENGTH, LIFETIME, RELIABILITY, SURVIVABILITY, AND SECURITY OF MACHINES AND MAN-MACHINE SYSTEMS
Makhutov N.A. Journal of Machinery Manufacture and Reliability. 2013. Т. 42. № 5. С. 364-373. |
|
4
|
A PARTICULAR SOLUTION OF THE AXISYMMETRIC PROBLEM IN PLASTICITY THEORY
Shcheglov B.A. Journal of Machinery Manufacture and Reliability. 2013. Т. 42. № 1. С. 22-28. |
|
5
|
A SEQUENTIALLY DEEPENED DISC CUT AS AN INDICATOR OF RESIDUAL STRESSES IN SPATIAL BODIES
Chernyatin A.S., Razumovskii I.A. Journal of Machinery Manufacture and Reliability. 2015. Т. 44. № 5. С. 471-478. |
|
7
|
AN INTEGRATED STUDY OF DEFECTS IN COMPOSITE MATERIALS USING BRITTLE STRAIN-SENSITIVE COATINGS AND ACOUSTIC EMISSION
Matvienko Y.G., Fomin A.V., Ivanov V.I., Severov P.B., Vasiliev I.E. Inorganic Materials. 2015. Т. 51. № 15. С. 1463-1467. |
|
8
|
APPLICATION OF LASER WELDING METHODS IN INDUSTRIAL PRODUCTION
Moskvitin G.V., Polyakov A.N., Birger E.M. Welding International. 2013. Т. 27. № 7. С. 572-580. |
|
9
|
APPLICATION OF SCENARIO ANALYSIS IN THE ASSESSMENT OF STRUCTURAL RELIABILITY OF COMPLEX TECHNICAL SYSTEMS
Makhutov N.A., Reznikov D.O. Journal of Machinery Manufacture and Reliability. 2015. Т. 44. № 8. С. 675-686. |
|
10
|
CALCULATION OF THE PARAMETERS OF THE LENNARD-JONES POTENTIAL FOR PAIRS OF IDENTICAL ATOMS BASED ON THE PROPERTIES OF SOLID SUBSTANCES
Filippova V.P., Kunavin S.A., Pugachev M.S. Inorganic Materials: Applied Research. 2015. Т. 6. № 1. |
|
11
|
COMBINING EXPERIMENTAL AND NUMERICAL ANALYSIS TO ESTIMATE STRESS FIELDS ALONG THE SURFACE CRACK FRONT
Chernyatin A.S., Matvienko Y.G., Razumovsky I.A. Frattura ed Integrita Strutturale. 2013. Т. 7. № 25. С. 15-19. |
|
12
|
COMPARISON BETWEEN FRACTURE BEHAVIOUR OF PIPE-LINE RING SPECIMENS AND STANDARD SPECIMENS
Gubeljak N., Likeb A., Predan J., Matvienko Y. Key Engineering Materials. 2014. Т. 577-578. С. 637-640. |
|
13
|
CONDITION DIAGNOSTICS OF RUSSIAN RAILWAYS INFRASTRUCTURE CONSTRUCTIONS UNDER AERODYNAMIC LOADS FROM HIGH-SPEED TRAINS
Kaplunov S.M., Valles N.G., Fursov V.Y., Belostotskii A.M., Dubinskii S.I. Automation and Remote Control. 2014. Т. 75. № 3. С. 580-586. |
|
14
|
CONSTRUCTION OF TRAJECTORIES OF THE FIBERS WHICH BYPASS A HOLE AND THEIR COMPARISON WITH THE STRUCTURE OF WOOD IN THE VICINITY OF A KNOT
Malakhov A.V., Polilov A.N. Journal of Machinery Manufacture and Reliability. 2013. Т. 42. № 4. С. 306-311. |
|
15
|
CRACK-RESISTANCE DIAGRAMS OF POLYMER COMPOSITE MATERIALS IN TENSION AND COMPRESSION
Matvienko Y.G., Semenova M.M., Konovalov V.V., Pankov A.V. Journal of Machinery Manufacture and Reliability. 2015. Т. 44. № 6. С. 520-530. |
|
16
|
CRITICAL STATES OF UNIAXIAL TENSION IN AN ORTHOTROPIC METAL
Shcheglov B.A., Ruzanov F.I. Journal of Machinery Manufacture and Reliability. 2013. Т. 42. № 4. С. 300-305. |
|
17
|
DESIGNING MACHINERY FOR THE ARCTIC: A PROBLEM OF SOCIOECONOMIC DEVELOPMENT OF RUSSIA’S EASTERN REGIONS
Makhutov N.A., Moskvichev V.V., Fomin V.M. Herald of the Russian Academy of Sciences. 2015. Т. 85. № 1. С. 79-86. |
|
18
|
DETERMINATION OF CRITICAL FLOW VELOCITY FOR TUBE-BUNDLE WITH APPLICATION OF NUMERICAL INVESTIGATION METHOD
Samolysov A., Kaplunov S., Valles N., Marchevskaya O., Dronova E. Energetika. 2015. Т. 61. № 3-4. С. 100-107. |
|
19
|
DETERMINATION OF FRACTURE MECHANICS PARAMETERS BY MEASUREMENTS OF LOCAL DISPLACEMENTS DUE TO CRACK LENGTH INCREMENT
Matvienko Y.G., Pisarev V.S., Eleonsky S.I., Chernov A.V. Fatigue & Fracture of Engineering Materials & Structures. 2014. Т. 37. № 12. С. 1306-1318. |
|
20
|
DETERMINATION OF FRACTURE MECHANICS PARAMETERS ON A BASE OF LOCAL DISPLACEMENT MEASUREMENTS
Matvienko Y.G., Pisarev V.S., Eleonsky S.I. Frattura ed Integrita Strutturale. 2013. Т. 7. № 25. С. 20-26. |
|
21
|
DETERMINATION OF THE BURDEN AND IMPERFECTION OF STRUCTURAL ELEMENTS ON THE BASIS OF DISAGREEMENT MINIMIZATION FOR EXPERIMENTAL AND COMPUTATIONAL DATA
Razumovskii I.A., Chernyatin A.S. Inorganic Materials. 2013. Т. 49. № 15. С. 1343-1351. |
|
22
|
DETERMINING THE TUBE BUNDLE STREAMLINING CRITICAL PARAMETERS USING THE NUMERICAL EXPERIMENT METHOD
Kaplunov S.M., Val’Es N.G., Samolysov A.V., Marchevskaya O.A. Thermal Engineering. 2015. Т. 62. № 8. С. 593-597. |
|
23
|
DEVELOPMENT OF TECHNIQUES FOR MECHANICAL TESTS IN MECHANICAL ENGINEERING
Makhutov N.A. Inorganic Materials. 2014. Т. 50. № 15. С. 1516-1520. |
|
25
|
EFFECT OF DAMAGE TO STRUCTURAL ELEMENTS ON THE DYNAMIC CHARACTERISTICS OF THE SYSTEM
Akhmetkhanov R.S. Journal of Machinery Manufacture and Reliability. 2015. Т. 44. № 6. С. 539-544. |
|
26
|
EFFECT OF NONSINGULAR T-STRESS COMPONENTS ON THE PLASTIC-DEFORMATION ZONES NEAR THE TIP OF A MODE I CRACK
Matvienko Y.G., Pochinkov R.A. Russian metallurgy (Metally). 2013. Т. 2013. № 4. С. 262-271. |
|
27
|
EFFECT OF OVERLOADS ON FATIGUE CRACK GROWTH REGULARITY WITHIN STEEL-MOLDED PIECES OF FREIGHT CARS
Moskvitin G.V., Lebedinskii S.G. Journal of Machinery Manufacture and Reliability. 2013. Т. 42. № 5. С. 439-444. |
|
29
|
ESTIMATING THE EFFECT OF MISORIENTATION OF FIBERS ON STIFFNESS AND STRENGTH OF PROFILED COMPOSITE ELEMENTS
Polilov A.N., Tatus' N.A., Plitov I.S. Journal of Machinery Manufacture and Reliability. 2013. Т. 42. № 5. С. 390-397. |
|
30
|
EXPERIMENTAL STUDY OF EROSION–CORROSION WEAR OF MATERIALS: A REVIEW
Prozhega M.V., Tatus N.A., Samsonov S.V., Kolyuzhni O.Y., Smirnov N.N. Journal of Friction and Wear. 2014. Т. 35. № 2. С. 155-160. |
|
31
|
EXPERIMENTAL-COMPUTATIONAL METHODS FOR DETERMINATION OF THE STRESS-STRAIN STATE OF STRUCTURAL COMPONENTS
Razumovskii I.A., Chernyatin A.S., Fomin A.V. Inorganic Materials. 2014. Т. 50. № 15. С. 1528-1536. |
|
32
|
FACTORS OF ESTIMATION OF STRESS STATES, DURABILITY, AND RESOURCE OF CRITICAL THREADED CONNECTIONS
Makhutov N.A., Gadenin M.M., Petrenya Y.K., Ivanov S.V. Inorganic Materials. 2015. Т. 51. № 15. С. 1479-1489. |
|
33
|
FAILURE RESISTANCE OF DRILLING RIG CASING PIPES WITH AN AXIAL CRACK
Medjo B., Rakin M., Gubeljak N., Matvienko Y., Arsi? M., Šarko?evi? ?., Sedmak A. Engineering Failure Analysis. 2015. Т. 58. С. 429-440. |
|
35
|
FINITE ELEMENT ESTIMATION OF THE PLASTIC ηPL FACTORS FOR PIPE-RING NOTCHED BEND SPECIMEN USING THE LOAD SEPARATION METHOD
Likeb A., Gubeljak N., Matvienko Y.G. Fatigue & Fracture of Engineering Materials & Structures. 2014. Т. 37. № 12. С. 1319-1329. |
|
36
|
FULL-SCALE PRESSURE VESSEL TESTS AT LOW TEMPERATURES AND EXTERNAL ELECTRIC POTENTIAL
Matvienko Y.G., Bolshakov A.M., Burnashev A.V. Journal of Machinery Manufacture and Reliability. 2015. Т. 44. № 1. С. 94-97. |
|
37
|
GUEST EDITORIAL: SPECIAL ISSUE NT2F13, 13TH INTERNATIONAL CONFERENCE 'NEW TRENDS IN FATIGUE AND FRACTURE'
Matvienko Y.G. Fatigue & Fracture of Engineering Materials & Structures. 2014. Т. 37. № 12. С. 1291. |
|
38
|
INA-PLANE AND OUTA-OFA-PLANE CONSTRAINT PARAMETERS ALONG A THREEA-DIMENSIONAL CRACKA-FRONT STRESS FIELD UNDER CREEP LOADING
Matvienko Y.G., Shlyannikov V.N., Boychenko N.V. Fatigue & Fracture of Engineering Materials & Structures. 2013. Т. 36. № 1. С. 14-24. |
|
39
|
INTEGRATED DIAGNOSTICS OF LIMIT STATES AND EARLY WARNING OF EMERGENCY CONDITIONS OF STRUCTURES
Makhutov N.A., Fomin A.V., Ivanov V.I., Permyakov V.N., Vasil'ev I.E. Journal of Machinery Manufacture and Reliability. 2013. Т. 42. № 2. С. 109-113. |
|
41
|
LASER WELDING OF PLASTICS (REVIEW)
Moskvitin G.V., Polyakov A.N., Birger E.M. Welding International. 2013. Т. 27. № 9. С. 725-734. |
|
43
|
MECHANISMS OF STRESS CONCENTRATION REDUCTION IN FIBER COMPOSITES
Polilov A.N. Journal of Applied Mechanics and Technical Physics. 2014. Т. 55. № 1. С. 154-163. |
|
44
|
METHODOLOGY AND SOFTWARE PACKAGE FOR ASSESSMENT OF STRESS-STRAIN STATE PARAMETERS OF FULL-SCALE STRUCTURES AND ITS APPLICATION TO A STUDY OF LOADING LEVEL, DEFECT RATE, AND RESIDUAL STRESS LEVEL IN ELEMENTS OF NPP EQUIPMENT
Chernyatin A.S., Razumovskii I.A. Strength of Materials. 2013. Т. 45. № 4. С. 506-511. |
|
45
|
METHODS OF THE CALCULATION AND EXPERIMENTAL DETERMINATION OF THE LOCAL RESIDUAL STRESSES UNDER SPECTRUM DEVELOPMENT OF COMPLEX LOADING
Makhutov N.A., Gadenin M.M., Odintsev I.N., Razumovsky I.A. Journal of Machinery Manufacture and Reliability. 2015. Т. 44. № 6. С. 531-538. |
|
46
|
NUMERICAL ANALYSIS OF THE COMPONENTS OF THE THREE-DIMENSIONAL NON-SINGULAR STRESS FIELD AT A MIXED-TYPE CRACK TIP
Matvienko Y.G., Chernyatin A.S., Rasumovskii I.A. Journal of Machinery Manufacture and Reliability. 2013. Т. 42. № 4. С. 293-299. |
|
47
|
NUMERICAL MODELING EDGE CHIPPING TESTS OF CERAMICS
Batanova O.A., Matvienko Y.G., Gogotsi G.A. Engineering Fracture Mechanics. 2014. Т. 132. С. 38-47. |
|
49
|
RATIONAL DIMENSIONS OF SEGMENTS OF BAMBOO STEMS AND COMPOSITE TUBES SUBJECTED TO COMPRESSION, FLEXURE, AND TORSION
Plitov I.S., Polilov A.N. Journal of Machinery Manufacture and Reliability. 2015. Т. 44. № 3. С. 239-248. |
|
50
|
RESIDUAL HARMFULNESS OF A DEFECT AFTER REPAIRING BY A COMPOSITE PATCH
Nateche T., Hadj Meliani M., Pluvinage G., Khan S.M.A., Merah N., Matvienko Y.G. Engineering Failure Analysis. 2015. Т. 48. С. 166-173. |
|
51
|
SAFETY FACTORS IN STRUCTURAL INTEGRITY ASSESSMENT OF COMPONENTS WITH DEFECTS
Matvienko Y. International Journal of Structural Integrity. 2013. Т. 4. № 4. С. 457-476. |
|
52
|
SELF-EXCITATION OF AN EXPERIMENTAL ROTOR WITH RADIAL WALLS AND FILLED PARTIALLY WITH LIQUID
Nikiforov A.N., Tatus’ N.A., Shokhin A.E. Journal of Machinery Manufacture and Reliability. 2015. Т. 44. № 3. С. 200-203. |
|
53
|
SIMULATION ANALYSIS OF THE FRACTURE MECHANICS PARAMETERS OF SUBSTANDARD SPECIMENS
Matvienko Y.G. Inorganic Materials. 2014. Т. 50. № 15. С. 1521-1527. |
|
54
|
SPECIFIC FEATURES OF ELASTOPLASTIC DEFORMATION AND FRACTURE OF STEELS AT COMPLICATED THERMOMECHANICAL STRESS PATHS
Makhutov N.A., Gadenin M.M., Evropin S.V., Chernyavskii O.F., Chernyavskii A.O., Rebyakov Y.N. Inorganic Materials. 2014. Т. 50. № 15. С. 1495-1505. |
|
55
|
SPECIMEN THICKNESS EFFECT ON ELASTIC-PLASTIC CONSTRAINT PARAMETER A
Nikishkov G.P., Matvienko Y.G. Frattura ed Integrita Strutturale. 2015. Т. 9. № 33. С. 73-79. |
|
56
|
SPECTRAL CHARACTERISTICS OF CRACK-LIKE DEFECTS IN THE CONDITION OF ROLLING FRICTION
Matvienko Y.G., Bubnov M.A., Myagkov K.A. Journal of Machinery Manufacture and Reliability. 2015. Т. 44. № 5. С. 445-448. |
|
57
|
STAGES OF THE DEVELOPMENT OF FATIGUE CRACKS IN LOW-CARBON STEEL UNDER IRREGULAR LOADING CONDITIONS
Moskvitin G.V., Lebedinskii S.G., Pugachev M.S. Journal of Machinery Manufacture and Reliability. 2015. Т. 44. № 2. С. 131-134. |
|
58
|
STRENGTH, SERVICE LIFE, AND SAFETY OF MACHINE SYSTEMS
Makhutov N.A. Journal of Machinery Manufacture and Reliability. 2014. Т. 43. № 3. С. 217-232. |
|
60
|
STUDIES ON THE FRACTURE MECHANISM AND KINETICS OF RANDOMLY ORIENTED SURFACE SEMIELLIPTIC CRACKS AT THE MULTIAXIAL STRESS-STRAIN STATE WITH DEFORMATION CRITERIA OF NONLINEAR FRACTURE MECHANICS
Makhutov N.A., Makarenko I.V., Makarenko L.V. Strength of Materials. 2013. Т. 45. № 4. С. 454-458. |
|
61
|
THE ACOUSTIC-EMISSION PROPERTIES OF OXIDE TENSOSENSITIVE INDICATORS AND SIGNAL RECOGNITION DURING THE FORMATION OF CRACKS IN A BRITTLE COATING LAYER
Matvienko Y.G., Vasil’ev I.E., Ivanov V.I., Elizarov S.V. Russian Journal of Nondestructive Testing. 2015. Т. 51. № 1. С. 39-49. |
|
62
|
THE CONCEPT OF THE AVERAGE STRESS IN THE FRACTURE PROCESS ZONE FOR THE SEARCH OF THE CRACK PATH
Matvienko Y.G., Semenova M.M. Frattura ed Integrita Strutturale. 2015. Т. 9. № 34. С. 255-260. |
|
63
|
THE EFFECT OF OUT-OF-PLANE CONSTRAINT IN TERMS OF THE T-STRESS IN CONNECTION WITH SPECIMEN THICKNESS
Matvienko Y. Theoretical and Applied Fracture Mechanics. 2015. Т. 80. С. 49-56. |
|
64
|
THE EFFECT OF THICKNESS ON OUT-OF-PLANE CONSTRAINT IN TERMS OF THE T-STRESS
Matvienko Y.G. Frattura ed Integrita Strutturale. 2014. Т. 30. С. 311-316. |
|
65
|
THE FAILURE CRITERION BASED ON HYDROGEN DISTRIBUTION AHEAD OF THE FATIGUE CRACK TIP
Matvienko Y.G. Frattura ed Integrita Strutturale. 2013. Т. 24. С. 119-126. |
|
66
|
THE INDENTATION METHOD AS A METHOD OF ASSESSMENT OF LOADING AND DEGRADATION OF MECHANICAL CHARACTERISTICS OF THE MATERIAL
Chernyatin A.S., Razumovskii I.A. Journal of Machinery Manufacture and Reliability. 2015. Т. 44. № 4. С. 337-343. |
|
67
|
THE INFLUENCE OF QUASI-STATIC LOADING REGIMES ON THE STRENGTH OF VESSELS OPERATING UNDER PRESSURE
Kovshova Y.S., Kuzeev I.R., Naumkin E.A., Makhutov N.A., Gadenin M.M. Inorganic Materials. 2015. Т. 51. № 15. С. 1502-1507. |
|
68
|
THE MASTER FAILURE CURVE OF PIPE STEELS AND CRACK PATHS IN CONNECTION WITH HYDROGEN EMBRITTLEMENT
Elazzizi A., Hadj Meliani M., Khelil A., Pluvinage G., Matvienko Y.G. International Journal of Hydrogen Energy. 2015. Т. 40. № 5. С. 2295-2302. |
|
69
|
THEORETICAL AND EXPERIMENTAL ASSESSMENT OF THREADED JOINT STRENGTH AND RESOURCE BASED ON ELASTOPLASTIC DEFORMATIONS
Makhutov N.A., Zatsarinnyi V.V. Journal of Machinery Manufacture and Reliability. 2015. Т. 44. № 1. С. 25-32. |
|
70
|
TWO-PARAMETER FRACTURE MECHANICS IN CONTEMPORARY STRENGTH PROBLEMS
Matvienko Y.G. Journal of Machinery Manufacture and Reliability. 2013. Т. 42. № 5. С. 374-381. |
|
72
|
DEVELOPMENT OF AUTOMATED SYSTEM FOR MONITORING OF STRESS-STRAIN STATE AND RESIDUAL SERVICE LIFE OF PIPELINES
Gadenin M.M., Makhutov N.A., Tsepilov G.V., Chibisov A.Y., Ivanov V.V. Research Journal of Pharmaceutical, Biological and Chemical Sciences. 2015. Т. 6. № 5. С. 1318-1326. |
|
73
|
MODELING AND FRACTURE CRITERIA IN CURRENT PROBLEMS OF STRENGTH, SURVIVABILITY AND MACHINE SAFETY
Matvienko Y.G. Journal of Machinery Manufacture and Reliability. 2014. Т. 43. № 3. С. 242-249. |
|
74
|
PROVISION OF SAFETY - THE PRIORITY IN THE SPHERE OF FUNDAMENTAL AND APPLIED RESEARCH
Makhutov N.A., Abrosimov N.V., Gadenin M.M. Economic and Social Changes: Facts, Trends, Forecast. 2013. № 3 (27). С. 39-61. |
|
75
|
THE COMPARISON OF DETERMINISTIC AND PROBABILISTIC ESTIMATES OF STRENGTH OF STRUCTURAL ELEMENTS OF TECHNICAL SYSTEMS UNDER SERIAL LOADING
Makhutov N.A., Reznikov D.O. Journal of Machinery Manufacture and Reliability. 2014. Т. 43. № 5. С. 384-388. |
|
76
|
THE INFLUENCE OF QUASI_STATIC LOADING REGIMES ON THE STRENGTH OF VESSELS OPERATING UNDER PRESSURE
Kovshova Yu.S., Kuzeev I.R., Naumkin E.A., Makhutov N.A., Gadenin M.M. Inorganic Materials. 2015. Т. 51. № 15. С. 1508-1513. |
|
77
|
THE INFLUENCE OF QUASISTATIC LOADING REGIMES ON THE STRENGTH OF VESSELS OPERATING UNDER PRESSURE
Kovshova Yu.S., Kuzeev I.R., Naumkin E.A., Makhutov N.A., Gadenin M.M. Inorganic Materials. 2015. Т. 51. № 15. С. 1510-1515. |
|
78
|
APPLICATION OF WAVELET TRANSFORMS FOR THE ANALYSIS OF ONE- , TWO- , AND THREE-DIMENSIONAL DATA ARRAYS
Akhmetkhanov R.S. Journal of Machinery Manufacture and Reliability. 2013. Т. 42. № 5. С. 432-438. |
